Portal
 
 
 FAQ  •  Search  •  Preferences  •  Usergroups  •  Register  •  Profile  •  Log in to check your private messages  •  Log in
 
 
View next topic
View previous topic

Post new topicReply to topic View previous topicEmail to a Friend.List users that have viewed this topicSave this Topic as filePrintable versionLog in to check your private messagesView next topic
Author Message
tutubebe99



Age: 35
Joined: 05 Jan 2010
Posts: 2080
Location: USA
blank.gif
PostPosted: Mon Jan 17, 2011 6:59 pm  Post subject:  How to import Nikon D7000 MOV footage to Final Cut Pro? Reply with quoteBottom of PageBack to top


How to import Nikon D7000 MOV footage to Final Cut Pro?


Image

“I have just acquired a Nikon D7000, and have tried importing some raw video footage shot with it into FCP 7 but to no avail…” If you’re experience the same issues, here’s an useful advice for you- converting Nikon D7000 .mov files to Apple ProRes codec before loading the footage to FCP. The Nikon D7000 cam encodes footage with H.264 codec and save the files in MOV container format. The MOV format is FCP friendly but H.264 codec is not natively supported by Final Cut Pro because H.264 encoded contents are highly compressed and are for delivery only. By transcoding/converting Nikon D7000 H.264 .mov to Apple ProRes 422 encoded .mov file, the possible best quality will be retained in post-production workflow and you can then edit the resulting media files just as you would edit in QuickTime Movie format without rendering. The following guide tells you how to convert Nikon D7000 MOV footage to Apple ProRes 422 codec for use in your Final Cut Pro sequence.

Step 1. Load H.264 .mov footage to Nikon D7000 MOV Converter.
Transfer h.264 encoded .mov files from NiKon D7000 camcorder to your Mac HDD via USB cable. Run Pavtube HD Video Converter for Mac as a H.264 MOV converter, and click the "Add" button to load .mov footage.

Image

Step 2. Set a FCP friendly codec (e.g. Apple ProRes 422) as export format.
Click on “Format” bar and set a FCP friendly codec in dropdown-list.You are advised to follow “Final Cut Pro” template and choose “Apple ProRes 422 (*.mov)” as export format. H.264 codec has a much higher compression ratio than Apple ProRes, so the ingested files are significantly larger than the original files. If you prefer smaller file size, choose “Apple ProRes 422 (LT) (*.mov)” instead. The “Apple ProRes 422 (Proxy) (*.mov)” format offers file size at SD levels and is recommended for 480i/p and 576i/p shootings. The Apple Intermediate Codec (*.mov) under “QuickTime Movie Format” template is recommended as an optional format for converting Nikon D7000 MOV files to Final Cut Pro.

Image

Step 3. Set possible best quality for FCP editing.
Click the “Settings” button and customize proper video/ audio parameters if necessary. Video size, bitrate and fame rate are flexible and can be adjusted as you like. E.g. Set video size to 1920*1080 when you feel like to keep 1080p as the source file features. Or set “original” in video bitrate drop-down list to keep best quality. You may skip this step as well as default format works well with FCP too.

Image

Step 4. Convert Nikon D7000 MOV files for FCP workflow.
Click "Convert" button to convert Nikon D7000 MOV files to FCP friendly files. Once the conversion is finished, you can click "Open" button to get the output files effortlessly. Now you have got it right, feel free to import and edit converted D7000 .mov footage in Final Cut Pro or Final Cut Express.

Additional editing features of the Pavtube HD Video Converter for Mac:

Combine files together- check the files to be merged in file list and check ‘Merge into one’ box beside ‘Settings’ button.
Deinterlace- click ‘Editor’, switch to ‘Effect’ tab, find ‘Deinterlacing’ box, and check it to eliminate interlacing lines.
Thumbnail- click ‘Snapshoot’ button when previewing the video. Click ‘Option’ to set the image format of screenshots.
Trim a section of the movie- click ‘Editor’, switch to ‘Trim’ tab, and input time point in start and end box.

-----------------------------------------------
Reviews Playing and put Movies/Videos/MP4/Divx/MKV/MTS/VOB/AVI on Samsung Galaxy Tab

Comment Play/view/install/put Blu-ray/DVD movies onto Samsung Epic 4G/Vibrant/Captivate/Fascinate via Pavtube Bluray DVD Video to Samsung Galaxy S Converter

Watching/Playing/Viewing Bluray Movies DVDs Videos to i9000 Galaxy S-Convert MPG/WMV/MP4/MTS/Divx/AVI/MKV to i9000 Galaxy S

Reviews Reading/Playing/Viewing DVD Movie to Phones via Pavtube DVD Movie to Nokia Converter-enjoy DVDs Movies to Nokia N8/Nokia E7/Nokia C7

Enjoy Blu ray Toy Story on iPad,iPhone4,Droid X,Galaxy S smartphones with your children when on railway



Capricorn Gender:Male Dog OfflinePersonal Gallery of tutubebe99View user's profileSend private message
tutubebe99



Age: 35
Joined: 05 Jan 2010
Posts: 2080
Location: USA
blank.gif
PostPosted: Tue Jan 18, 2011 5:35 pm  Post subject:  (No subject) Reply with quoteBottom of PageBack to top

Blu-ray Ripping- improve Blu-ray converting speed with GPU acceleration

Image

Blu-ray ripping: why it takes so long?
By ripping Blu-ray to 1080p HD video clips, the Blu-ray movies can be played back freely over PC HD media players and Video DVD players as well, and are no longer restricted to play in applicable Blu-ray player only. Many movie lovers find it takes long time to rip a Blu-ray Disc to PC, especially when they choose 1080p MKV/MP4/AVI/WMV as export format. If you have a PC/laptop with Intel CORE i5/i7 processor with 6GB of RAM or above and run an effective Blu-ray ripping/converting tool exclusively, the Blu-ray ripping process could takes around an hour. Generally speaking, Blu-ray ripping process can cost 2-8 hours when working on a slower/regular PC. The higher quality you get, the longer it takes.

Time-saving solutions for ripping Blu-ray Disc to Windows 7
Is there any way to shorten the Blu-ray ripping time? Yes. Here I’d share with you some tricks for ripping Blu-ray at faster speed.
A. Rip Blu-ray to M2TS streams without en-decoding.
This is an easiest and fastest way for backing up full Blu-ray data, as it copies high-def Blu-ray M2TS to your hard drive straightly without en-decoding process. The good thing is you’ll get Blu-ray clips in the way they are made into BD, so there will not be any quality loss. All you need is Blu-ray decrypting software like Pavtube Blu-ray Disc Ripper v3.7, and the whole process takes 40min to 1 hour only on a regular PC. But there are few portable media players play M2TS streams without a hitch, so make sure your media player or PC meet the Blu-ray playing specifications first. VLC Player software is recommended for playing M2TS on PC. Learn how to copy Blu-ray Disc to lossless M2TS streams.

Image

B. Accelerate Blu-ray ripping process by taking advantage of NVIDIA’s GPU acceleration tech.

Image

By processing video conversions on NVIDIA's GPU instead of your computer's CPU, Blu-ray ripping time can greatly shorted and more CPU resources can be spared for other applications, making your computer run much smoother. For instance, recently released Pavtube Blu-ray Disc Ripper v3.7, which is accelerated by CUDA (NVIDIA GeForce GTS 240), takes 90min only to rip Blu-ray Avatar to 1080p H.264 MP4 file (output size- 10GB), comparing with 270min when ripping with its previous version Pavtube Blu-ray Disc Ripper v3.6. The ripping speed can be faster when/if the GeForce GTS 240 is replaced with a more powerful CUDA enabled Graphics card. This way works only when there is an NVIDIA’s CUDA enabled Graphics card and you rip Blu-ray into H.264 encoded formats (H.264 MKV, MP4, MOV, TS, etc). Learnhow to gear up Blu-ray ripping speed with CUDA.

C. Make a concession in video quality to shorten Blu-ray ripping time.
If you do not mind losing some quality, a good way that shorten Blu-ray ripping time is setting lower output quality when ripping Blu-ray to hard drive. The smaller output video is, the short time it takes to rip Blu-ray to your computer. Again take Pavtube Blu-ray Ripper v3.7 for example; a Blu-ray movie of 20GB will be compressed to 12GB when you set “MKV HD” as output format. When you set the video “Bitrate” to “medium quality” instead of “high quality”, the file size is cut down to 8GB and the ripping time is 1/3 down meanwhile. Learn how to balance video size and quality when ripping Blu-ray movie.

Image

D. Use a faster computer to do Blu-ray ripping.
As I mentioned above, a faster computer rips Blu-ray at faster speed. I believe that movie enthusiasts and people who intend to build a HTPC home network for sharing video contents would probably choose this ultimate solution. One of my friends told me that his newly built HTPC is able to complete the ripping of a 90min Blu-ray in half an hour, and he use 1080p HD MKV format!

Hope this post helps. More Blu-ray ripping solutions can be found at Pavtube Blu-ray Special.


------------------------------------------
Blu-ray backup-back up commercial Blu-ray Discs to ISO/blank BD/lossless M2TS streams/1080p HD videos

Top Pavtube Movies DVDs to WD TV Converter for Mac-Install/Play/Put/See Movies and DVDs on WD TV

Watching/Viewing/transfer DVD Movies to Windows Phone 7 Samsung Focus via Pavtube DVD Movie to Samsung Focus Converter

Playing/Watching/See/Start Bluray Movies DVDs Videos to Xbox Media Center


Capricorn Gender:Male Dog OfflinePersonal Gallery of tutubebe99View user's profileSend private message
tutubebe99



Age: 35
Joined: 05 Jan 2010
Posts: 2080
Location: USA
blank.gif
PostPosted: Wed Jan 19, 2011 5:39 pm  Post subject:  (No subject) Reply with quoteBottom of PageBack to top

How to edit MOD, TOD, and MTS files in Mac Avid Xpress Pro?


Image

Avid Xpress Pro was a non-linear video editing software aimed at professionals in the TV and movie industry. However, Xpress Pro was discontinued on March 17, 2008, and was no longer for sale after June 30, 2008. If you are using Panasonic AVCCAM cameras or some JVC cameras which record footage in the format of MTS, MOD, or TOD, you may get trouble when importing these files into Avid Xpress Pro for further editing. In that case, you just need use a practical Avid converter to convert MOD, TOD, and MTS files to Avid Xpress Pro compatible file types, like Avid DNxHD (*.mov). The following guide tells how to edit MOD, TOD, and MTS files in Mac Avid Xpress Pro in detailed steps, if you are looking for such a solution, just feel free to check it.

Guide on how to edit MOD, TOD, and MTS files in Mac Avid Xpress Pro.

Step 1: Load MOD, TOD, and MTS files to Pavtube Mac Avid converter.
Run Pavtube HD Video converter for Mac as the Mac Avid converter. Click “Add” button to load MOD, TOD, and MTS files shot by Panasonic AVCCAM cameras or JVC cameras. You are allowed to add multiple files to do batch conversion at a time. Meanwhile, if you wanna combine several files into a single file, you can tick off the checkbox “Merge into one file”.

Image

Step 2: Select “Avid DNxHD (*.mov)” as output format for Mac Avid Xpress Pro
Click on the dropdown menu of “Format”, and then follow “QuickTime Movie Format” > “Avid DNxHD (*.mov)”.

Image

Step 3: Set advanced settings
To convert MOD, TOD, and MTS files to Avid Xpress Pro, you are allowed to click “Settings” button to adjust audio and video parameters, including size, bit rate, frame rate, sample rate and audio channel.

Image

Step 4: Convert MOD, TOD, and MTS files to Avid Xpress Pro
Click “Convert button to start converting MOD, TOD, and MTS files to Avid Xpress Pro. When conversion is finished, you can click “Open” button to get the final output files. By then you are ready to edit MOD, TOD, and MTS files in Mac Avid Xpress Pro.


Capricorn Gender:Male Dog OfflinePersonal Gallery of tutubebe99View user's profileSend private message
tutubebe99



Age: 35
Joined: 05 Jan 2010
Posts: 2080
Location: USA
blank.gif
PostPosted: Thu Jan 20, 2011 6:09 pm  Post subject:  (No subject) Reply with quoteBottom of PageBack to top

The Pavtube Blu-ray Ripper
-All-in-one Blu-ray/DVD ripper, converter, and editor.
-Rip/convert Blu-ray/DVD to AVI, MKV, MPG, and more.
-Remove AACS and BD+ encryptions up to MKB V20 from Blu-ray Discs.
-Guarantee audio and video in sync/3X faster with CUDA acceleration.
-Support using multiple cores to do conversion.
-Support selecting audio tracks and subtitles, including forced subs.
-Support “Full Disc Copy” to remain Blu-ray/DVD originals.

----------------------------------------------
Best Movie to Galaxy Tab-Watch/play/put Blu-ray and DVD movies on Samsung Galaxy Tab via Pavtube Bluray DVD to Galaxy Tab Converter

Playing DVD movies on Apple TV with AAC/AC3/DTS 5.1 surround sound or Stereo via Pavtube DVD to Apple TV Ripper for Mac

Reviews Pavtube Bluray movies DVD Video to Galaxy S Converter-Playing MKV/AVI/MPEG4/VOB/WMV to Samsung Mesmerize

Watching/Playing/Viewing Bluray Movies DVDs Videos to i9000 Galaxy S-Convert MPG/WMV/MP4/MTS/Divx/AVI/MKV to i9000 Galaxy S

TipsAVI/MKV/DivX/WMV/MP4 to Archos 7-Playing/watching Videos to Archos 7 via Video to Archos Converter


Capricorn Gender:Male Dog OfflinePersonal Gallery of tutubebe99View user's profileSend private message
ioslover




Joined: 07 Jun 2011
Posts: 2170

blank.gif
PostPosted: Tue Jun 07, 2011 4:23 pm  Post subject:  (No subject) Reply with quoteBottom of PageBack to top

typical apple nut A href="http://www.asus.com/Eee/Eee" rel=nofollow>http://www.asus.com/Eee/Eee/A>EM>Pad/Eee/EM>PadEM>Transformer/EM>TF101/ says otherwise. The tablet is 399 has dual core, ipd (yes ips) display on a tablet. 3D stereo surround sound, 16 hour battery life, Android 3.0, and it even has usb ports. To give insult to injury it has multi card readers built in. Its light, and fast. Its everything the ipad2 should have had. convert mp4 to dvd They won't have two completlely different apps. Some of Tweetdeck's features may be added to the official (Tweetie) version to create a Pro version, but Tweetdeck as it exists now will die. Personally, I don't care since I don't like either of them.


   OfflinePersonal Gallery of iosloverView user's profileSend private message
wts30286




Joined: 06 Nov 2012
Posts: 45130

blank.gif
PostPosted: Tue Nov 13, 2012 7:39 pm  Post subject:  (No subject) Reply with quoteBottom of PageBack to top

383酒店
依林酒店
金璁酒店
凱渥酒店
金湯池酒店(首席)
皇家翡翠酒店
君悅酒店
金將酒店
高盛酒店(鴻海)
心悅酒店(26會所)
巴黎情人酒店(格調、春天)
帝豪商務會館(鑽石帝國)
寶格麗酒店(后宮)
美麗佳人酒店(東方情人)
台北夜店
酒店
台北酒店經紀
出國工作
酒店上班
女服務生
業績幹部
公主
常董
飯局小姐
牡羊座
金牛座
雙子座
巨蟹座
獅子座
處女座
天秤座
天蠍座
射手座
暑期打工
高雄酒店經紀
魔羯座
暑期打工
台南酒店經紀
水瓶座
暑期打工
雙魚座
12星座
星座血型
13星座蛇夫座
星座配對


   OfflinePersonal Gallery of wts30286View user's profileSend private message
Display posts from previous:      
Post new topicReply to topic View previous topicEmail to a Friend.List users that have viewed this topicSave this Topic as filePrintable versionLog in to check your private messagesView next topic

View next topic
View previous topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum



RSS Feed


Board Security

189244 Attacks blocked
Powered by phpBB2 Plus, phpBB Styles and Kostenloses Forum based on phpBB © 2001/6 phpBB Group
FI Theme :: Mods and Credits :: All times are GMT - 8 Hours