Portal
 
 
 FAQ  •  Search  •  Preferences  •  Usergroups  •  Register  •  Profile  •  Log in to check your private messages  •  Log in
 
 
View next topic
View previous topic

Post new topicReply to topic View previous topicEmail to a Friend.List users that have viewed this topicSave this Topic as filePrintable versionLog in to check your private messagesView next topic
Author Message
robinhan




Joined: 20 Mar 2011
Posts: 883

blank.gif
PostPosted: Wed May 09, 2012 3:47 am  Post subject:  MXF to MOV Mac, how to convert MXF to MOV on Mac? Reply with quoteBottom of PageBack to top


MXF to MOV Mac, how to convert MXF to MOV on Mac?

MXF is abbreviation for Material eXchange Format, it is a container format for professional digital video and audio media defined by a set of SMPTE standards. MXF files is not compatible well on Mac OS and it is supported by many portable players and some software like Quicktime, iMovie and so on. MOV is a video format which supported by many softwares on Mac. To paly MXF files on Quicktime or edit MXF files with iMovie on Mac, Mac users should find a solution to convert MXF to MOV on Mac.

Mac MXF to MOV Converter is strongly recommend for you to convert MXF file to MOV format on Mac. With it, converting MXF to MOV will be not a problem any more, you can finish the conversion in fast conversion speed and get the high quality videos. The converter also can convert MXF to other video formats like MP4, WMV, AVI, MKV, FLV, VOB, MPG, and so on which let you enjoy the MXF files on different players. The most important is this converter offers you perfect conversion exprience.

In addition, MXF to MOV Converter for Mac not only can be used as a converter, it but also can be used as a video editor. The editing functions like cropping, merging, trimming videos, adding watermark, etc are provides for video funs to make or edit MXF videos before converting MXF to MOV on Mac. All settings and conversion will ready just within seveal clicks. After converting, you can enjoy your MXF videos on Mac.

The step-by-step guide for you to convert MXF file to MOV on Mac

Step 1. Add MXF files to this converter

Downlaod, run the MXF to MOV Converter for Mac, then click "Add Video" button to load the MXF files.

Image

Step 2. Select the output format

Click the "Format" drop-down list, you can choose the format like MOV as the output format from the list. Then click "Browse" button the set the output files destination.

Step 3. Start converting MXF to MOV on Mac

Once the above mentioned steps and some settings are finished, you can click "Convert" button to convert MXF to MOV on Mac.



   OfflinePersonal Gallery of robinhanView user's profileSend private message
ivy00135
Currently banned




Joined: 06 Nov 2012
Posts: 49808

blank.gif
PostPosted: Thu Nov 08, 2012 6:08 pm  Post subject:  (No subject) Reply with quoteBottom of PageBack to top

制服酒店
酒店上班
高雄酒店經紀
台南酒店經紀
高雄酒店經紀
高雄高登酒店經紀公司
便服酒店
傳播小姐
公主
制服酒店
台北酒店
國外打工
奧客
女服務生
威尼斯酒店
寒假打工
小吃部
少爺
常董
新富爺101酒店
暑期打工
酒店
業績幹部
治裝費
禮服酒店
訪檯副總
訪檯幹部
酒家女
酒店上班
酒店公關
酒店兼差
酒店小姐
酒店工作
酒店應徵
酒店經紀
飯局小姐
高雄酒店
高雄酒店經紀
酒店經紀
高雄酒店
高雄酒店經紀
便服酒店
酒店上班
閃酒


   OfflinePersonal Gallery of ivy00135View user's profileSend private message
ipad001



Age: 33
Joined: 27 Dec 2012
Posts: 394

blank.gif
PostPosted: Fri Nov 07, 2014 6:38 pm  Post subject:  convert DVR-MS to FCE on Mac with Mac DVR-MS to FCE Reply with quoteBottom of PageBack to top

DVR-MS to FCE on Mac - How to convert DVR-MS to FCE on Mac with Mac DVR-MS to FCE Converter?

All of us know that DVR-MS (Microsoft Digital Video Recording) is a proprietary video and audio file container format used for storing recorded television content, it is introduced in Microsoft Windows XP Media Center Edition while FCE, which is short for Final Cut Express, is a discontinued non-linear video editing application created by Apple Inc.

But how to edit your DVR-MS files on Final Cut Express is confuse most of us yet, last week I luckily find a conversion tool on the google that are popular among Mac users, which can help us convert DVR-MS to FCE on Mac with fast speed at perfect output quality and can help us edit our DVR-MS files on Final Cut Express.

This Mac DVR-MS to FCE Converter is specially designed for Mac users which is easy to use, you can handle it easily no matter your are a novice or a professional, only with several mouses, you can import DVR-MS to FCE on Mac soon. What's more, this Mac DVR-MS to FCE Converter provides powerful editing function which can help you edit your files by yourself, such as you can crop video, trim video, merge video and other useful editing functions to make your files more attraction.

How to convert dvr-ms video to FCE .mov on Mac?

Step 1: Add dvr-ms files to DVR-MS to FCE Converter for Mac
Click "Add" button to add dvr-ms files which you want to convert into DVR-MS to FCE Converter from your Mac.
Image
Step 2: Select FCE ".mov" as the output format
You can choose iMovie ".mov" as output, if you want, you can make some editing to the file before conversion such as trimming videos, cropping videos, adding watermark.

Step 3: Start Convert
After settings are done, click "Convert" button to convert DVR-MS to FCE .mov on Mac.

_________________
DVD to iPad
DVD to iTunes

Capricorn  Rat OfflinePersonal Gallery of ipad001View user's profileSend private messageVisit poster's website
ipad001



Age: 33
Joined: 27 Dec 2012
Posts: 394

blank.gif
PostPosted: Mon Nov 24, 2014 11:51 pm  Post subject:  MP4 to GIF - How to Convert MP4 to GIF with MP4 to GIF Reply with quoteBottom of PageBack to top

MP4 to GIF - How to Convert MP4 to GIF with MP4 to GIF Converter?

The Graphics Interchange Format, well known as it's abbreviation GIF, is a bitmap image format that supports animations so that whenever you see a logo or other sharp edged line art then you are probably dealing with the GIF format. It uses the lossless data compression technique which can reduce the file size without any impact on the quality.

If you tend to convert MP4 files to GIF, then the MP4 to GIF Converter may be your best choice. There's one point I want to tell you is that you can not only convert MP4 to GIF, but also convert all your known videos to animated GIFs. The software is an easy to use application that will help you quickly load a video from an online resource quickly, capture the desired frames and turn them into an animated GIF with only a couple of clicks. You can also choose the part you prefer to convert, then you will enjoy your favourites. What's more, you can add some subtitles and make your own movies. It's really cool.

MP4 to GIF Converter is a great program. Small, light, simple and extremely useful if you need to create a proper GIF animation quickly and painlessly. With it, you can find the easist and fastest way to turn videos into GIFs.

Step by step tutorial to use MP4 to GIF Converter

Step 1: Play video
Install and run the MP4 to GIF app and then play your video either local video or online video (play local video with your video player).
Image
Step 2: Move and Resize MP4 to Gif Converter window
Move the MP4 to Gif window on your video and resize the window to proper size that you need.

Step 3: Click "start" button
When the video plays to the time that you want, just click the "start" button, and when you want to end, just click "stop" which instead "start".

Tips:
By the "edit" button the MP4 to GIF Converter allows you to Cut Unwanted Frames, Create High Definition(HD) GIFs, Create GIF Movie with Subtitles, Add Texts on Existing GIF.

Step 4: Create Gif
At the end you just need to click the "Create GIF" button to get your own gif picture and then share with your friends and family.

_________________
DVD to iPad
DVD to iTunes

Capricorn  Rat OfflinePersonal Gallery of ipad001View user's profileSend private messageVisit poster's website
ujinwang3




Joined: 11 Nov 2014
Posts: 251

blank.gif
PostPosted: Mon Dec 08, 2014 10:50 pm  Post subject:  (No subject) Reply with quoteBottom of PageBack to top

QuickTime player can't playback Sony XDCAM video? Here you will find the easiest solution to convert XDCAM EX HD MP4 files to QuickTime MOV for playback Mac.


XDCAM EX

The Sony XDCAM EX is a high-quality video camcorder, capable of shooting in either standard definition or high definition. XDCAM EX video and audio content is stored on Sony SxS solid-state Express Card 3/4 media within MP4 container files. You can record video either 1920 x 1080 or 1280 x 720 modes.

XDCAM EX HD MP4 video is recorded from Sony XDCAM EX. But after test, we find that this *****MP4 format by Sony can't even be played on Mac OS 10.8*****. Many fresh users don't know what to do. But don't worry. Just follow me to learn how to play and view .mp4 files from Sony XDCAM EX camcorders.

Image

Soutions:

1. With running XDCAM Browser you can preview the MP4 files or export as a mxf file, but can't transfer to a .mov file and this rewapped .mxf file may not be viewing.

2. Of course You can play this video file on the camcorder and through the Sony software, but if you use QuickTime as your media player, you will have to convert Sony XDCAM HD file to a compatible format with QuickTime MOV for playback. So how to convert a XDCam EX MP4 file into a mac-compatible .mov file for enjoying which retain the same size and quality?
  • Calibrated{Q} MP4-EX Import component ($149.95) supports tranferring MP4 to QuickTime MOV. (Not supported FCP X)
  • Calibrated{Q} XD Decode codec ($89.95) to encode MP4 files for playback. (Not for use when any version of Final Cut Pro, Final Cut Studio or Final Cut Server is installed, and at least a Intel Core 2 Duo with two physical cores is highly recommended)
  • As the solution above takes too much money, and you may may have reliability and incompatiblity issues. Here comes the third solution, using Pavtube HD Video Converter for mac($35) can helps you to tranfer Sony XDCAM MP4 to QuickTime mov easily and fastly. (Easy and Helpful)


See also: Pavtube HD Video Converter for Mac 3.6.1 Review

As you see, the last solution is the esaiest and effective way. Below are step to step guide for Converting and Transferring an XDCAM EX to QuickTime on Mac.

Step 1. Download Sony XDCAM MP4 to MOV Converter for Mac, and install it. Click the Add Video button to import Sony XDCAM EX seperate mp4 files or press on"add from folder" button to add MP4 folder.

Image

Step 2. Select output format.

Click on the dropdown menu of "Format" and select "Common Video -> MOV – QuickTime (*.mov)" as target format. This format is specially designed for QuickTime playback. You can also choose format as you need in the format column, such as AVI, MKV, MP4, etc.

Image

Step 3. Adjust video and audio parameters.

Click "Settings" button to customize the output video and audio settings by yourself. You can also use the default parameters, they will ensure you a good balance between file size and image quality basically. You can change the resolution, bitrate, frame rate as you need.

Image

Step 4. Click "Convert" button and start transcoding Sony XDCAM MP4 to QuickTime MOV on your Mac.

After you converting Sony XDCAM EX MP4 Video to MOV for QuickTime player, you can play the converted footages smoothly on Mac.

With Pavtube HD Video Converter for Mac, you can also convert your XDCAM footages to FCP in less time, and easily change XDCAM EX files to iMovie, import XDCAM MXF to After Effects CS4/5/6 for editing, video and audio synchronization are perfectly guaranteed.

Read more:
Top 5 Best HD Video Converters for Mac OS X Yosemite/Mavericks
Can't open Sony PXW-X70 MXF Videos in Final Cut Pro X
Transcode TiVo shows to AIC for editing with iMovie and FCE
How to Convert QuickTime file to iMovie?
Work Panasonic GH4 4K MOV/MP4 with Avid MC
Need Tips on Importing MTS to Corel VideoStudio Pro X7?
Natively Import AVI Files Recorded From Bandicam to Lightworks Pro
Ingest Panasonic PX270 AVC-LongG MXF to Adobe After Effects CC/CS6
Import Sony PMW-300K1 MXF to Avid Media Composer
MXF Not Friendly with Premiere Pro CC? How to Solve it?

Source: http://pc-mac-compatibility-issues.blogspot.com/2013/05/Working-with-Sony-XDCAM-to-play-with-QuickTime-on-Mac.html


   OfflinePersonal Gallery of ujinwang3View user's profileSend private message
ujinwang3




Joined: 11 Nov 2014
Posts: 251

blank.gif
PostPosted: Tue Jan 13, 2015 6:28 pm  Post subject:  (No subject) Reply with quoteBottom of PageBack to top

Summary: Confused in converting MXF or P2 MXF files to MOV, MPG, MP4,AVI or FLV for editing or playing on Mac?

Where does and MXF or P2 MXF come from?
For most camcorder owners, they usually have a headache of the video format from their camcorders produce. For camcorders like Panasonic AG-HVX200, Sony PMW-350kit, Canon XF300, etc which produces MXF or P2 MXF files that can't be compatible for most players or editing software. In other words, it is so necessary for us to encode MXF/P2 MXF to those common video formats on Mac, for example: MOV, MPG, MP4, AVI or FLV.

Image

A nice way to make MXF compatible with devices on Mac.

You may have got a question: how can we encode MXF or P2 MXF to those common videos in an effective way? That's right, it is so cool that if there is indeed a strong converting tool can make it true, isn't it? Pavtube MXF/P2 MXF Converter for Mac is just the right one which has the features of converting MXF to most popular videos to play on different players on Mac.

In additional, MXF Converter for Mac is also an outstanding audio extractor as well. With it, you can transform MXF to almost all of audio formats like MXF to MP3, MXF to WAV, FLAC, AAC, AC3, etc.


See also: Top 5 Best MXF Converters for Mac Review

[size="3"]Start the conversion from MXF to MOV, MPG, MP4, AVI or FLV.[/size]

Firstly, Add the MXF files into this program with 'Add video' or 'Add from folder. Then pick the different choices for different editing systems and devices. For example below:

- Select output formats from "iPhone", "iPad and Apple TV"and "iPod"categories in order to play MXF files in iPhone, iPad, iPod, iTunes and Apple TV;
- Appoint "QuickTime Video (*.mov)"as output format from "Common Video" menu to play MXF files back on QuickTime;
- Assign "ProRes Apple ProRes codec (*.mov)"as output format from "Final Cut Pro" menu so as to edit MXF file on Final Cut Pro

Image

Not for devices? Just click the 'Common Video' to choose the video you like. Including MOV, MPG, MP4, AVI or FLV. Then, 'Editor' is waiting for you if you want more advanced choices with output videos. 'Trim', 'Crop', 'Watermark' or 'Effect' items are offered here. Only get into the interface to learn more.

Image

Start conversion and wait for your output videos, if you still have problems in this process, welcome to leave us comments here.

Other realted guides for you:
------* Convert Samsung NX1 H.265 videos to H.265 or H.264 MP4 video
------* Let’ s Change Sony NXCAM 3D MTS into SBS MP4 for a Playback
------* Share Tips on How to Enjoy HD MKV Movies on Apple TV/2/3
------* Top 3 Best XAVC/XAVC S Video Converter for Mac Review
------* Make Sony a7 II XAVC S Accepted by Avid Media Composer on Mac OS X
------* KMPlayer Cannot Work or Play MP4/H.264 MKV Videos? Fixed!


Never miss to get Saving up to $44.1, MXF/MTS/M2TS/MKV/FLV/MOV Converter.etc at Pavtube Bundles Deals!
Clic: http://www.pavtube.com/Bundles-Deals.html

Image

souce: http://videostepconvertmap.blogspot.com/2015/01/encode-mxfp2-mxf-to-mov-mpg-mp4-m4v-avi.html


   OfflinePersonal Gallery of ujinwang3View user's profileSend private message
ujinwang3




Joined: 11 Nov 2014
Posts: 251

blank.gif
PostPosted: Mon Jun 01, 2015 9:37 pm  Post subject:  Upload OBS FLV to YouTube/Vimeo Sharing Windows Reply with quoteBottom of PageBack to top

Upload OBS FLV Video to YouTube/Vimeo for Sharing on Windows/Mac

Overview: Some users complain that "My attempts at uploading OBS FLV video to YouTube/Vimeo fail during processing." It's obvious that import OBS FLV video to YouTube/Vimeo may cause some issues.

Image

Source: Upload OBS FLV Video to YouTube/Vimeo

Open Broadcaster Software is free and open source software for video recording and live streaming. Have you ever recorded some game footage with OBS? Generally OBS saves files as MP4 or FLV. It says that the files can be uploaded straight to YouTube or other video hosting site just fine. But why I encounter incompatible issues when importing OBS FLV video to YouTube/Vimeo or other situations like OBS videos to Premiere, OBS FLV to Avid, OBS FLV to DaVinci Resolve?

FLV usually comes from a video-sharing website like YouTube, Vimeo or from OBS (Open Broadcaster Software), etc. Though FLV is the same format with YouTube supported one, the codec of OBS FLV videos is totally different from YouTube best accepted one. Since YouTube is the most popular website where we can upload our favorite videos to it for sharing online with other people, any good solutions to transcode OBS FLV video to YouTube/Vimeo directly?

To upload OBS FLV video to YouTube/Vimeo flawlessly, you'll need to convert OBS FLV to YouTube/Vimeo both compatible format. In this case, Pavtube Video Converter for Mac is the first and best choice for you. With the recent upgraded version 4.8.5.1, it can encode/decode H.265/HEVC videos so nicely. If you are running on Windows, you can refer to the equivalent version Pavtube Video Converter.

Image Image

Other Download:


How to upload OBS FLV video to YouTube/Vimeo for sharing on Windows/Mac? (Take Mac version as an example.)

Step 1. When you download and install the Mac Video Converter, open the main interface and choose the "Add video" to load your OBS FLV videos in. For the multiple video clips we can hit the "Add from folder" button.

Image

Step 2. Before choosing the format, you can check about the supported formats of YouTube and Vimeo first then decide which output format to choose. As we can see from those two sites, both the H.264 codec contained with MP4 can be supported by them both. So we go to the "Format" bar then choose "HD Video>>H.264 HD Video (*.mp4)" as the output format.

Image

Step 3. Most of you guys must have the desire of a further editing with your output videos, right? On the main interface, "Edit" is waiting for you. "Trim" to decide where to start and where to end, "Crop" to cut some unwanted clips, "Subtitles" to add some explanations to your audience.

Step 4. Click the "Convert" button under the preview window and the Mac Video Converter starts converting. By the way, you can take a screenshot at your favorite frame.

Conclusion: After converting, you can click the "Open" button to find your converted files. Now, you can upload OBS FLV video to YouTube/Vimeo for sharing on Windows/Mac without any worries! What are you waiting for? Just go ahead and have a try! Enjoy it!

More Tips:
Play Canon Videos on Windows Media Player
Work DJI Inspire 1 4K Videos with Adobe Premiere Pro
Edit Samsung NX500 4K H.265 AVI/MP4 in iMovie/FCE
Convert NX500 H.265/HEVC 4K Video to Ultra HDTV for Playing
Samsung NX500 H.265 to FCP X Workflow on Mac OS X Yosemite
Import WX500 XAVC S to iMovie for Editing
Convert AX30 4K XAVC S to ProRes/AVI/MPEG-2/WMV for Editing
Encode/Decode PXW-X70 XAVC-L MXF to Avid MC 8 on Mac
Edit Sony DSC-WX500 XAVC S in DaVinci Resolve Lite
Ingest NX500 4K H.265/HEVC to QuickTime for Playing
Best HX90/HX90V XAVC S Video Converter for PC/Mac
Edit Sony HX90V XAVC S in Sony Vegas/Pinnacle/WMM


Good News! Pavtube Bundles Dealsare coming! If you want to import/preserve/mix multi-track MXF in MKV/MP4/MOV formats, get multi-track Apple Prores MOV for further editing in Final Cut Pro (X), the following bundled software is your best choice:?
--------Video Converter($35) + MXF MultiMixer($45) = $54.9, Save $25.1 (buy link)
--------Video Converter for Mac($35) + iMixMXF($45) = $54.9, Save $25.1 (buy link)
Go ahead and click the link to get your coupon. Save up to $44.1!Never miss!!!

Image


   OfflinePersonal Gallery of ujinwang3View user's profileSend private message
ujinwang3




Joined: 11 Nov 2014
Posts: 251

blank.gif
PostPosted: Sun Jul 05, 2015 6:22 pm  Post subject:  (No subject) Reply with quoteBottom of PageBack to top

Play Canon T6s/760D MP4 videos on VLC/QuickTime

Summary: Tips and tricks for importing Canon T6s/760D MP4 files to VLC and QuickTime for playing and enjoying. Learn details.

Image

EOS Rebel T6s/760D is a new model in Canon's DSLR. Users can record Full HD MP4 files with it. But there are some problems such as not showing the video, unsupported file type when playing and enjoying Canon T6s/760D MP4 videos. You cannot import recordings from Canon T6s/760D to VLC or QuickTime for playing. Is there any quick fix for the problems with Canon T6s and VLC/QuickTime?

VLC does play MP4 files, but it has strict limitations: VLC Media Player is only compatible with MPEG-4 ASP, DivX 4/5/6, XviD, 3ivX D4 and H.264 / MPEG-4 AVC. However, MP4 is a multimedia container format with many kinds of video and audio codec. If your MP4 file contains a VLC unsupported audio or video codec, VLC won't play it. In this case, we will encounter the following symptoms when we play MP4 files in VLC:

Question 1: "I'll get to about 1 hour and 50 minutes of a 3 hour long .mp4 video and the video will just stop, and it happens to all the videos I've downloaded."

Question 2: "I am a fan of VLC so use it on most machines to play MP4 videos from my NAS. Tonight it has just stopped displaying the video."

Question 3: "VLC will not play certain mp4 h264 files. Some H.264 files work, others don't."

How to solve "VLC/QuickTime not playing MP4" Issue? Pavtube Video Converter for Mac is specially designed for solving the VLC/QuickTime MP4 issue like "Does VLC/QuickTime play MP4? Can VLC/QuickTime play MP4? VLC/QuickTime is not playing MP4? VLC/QuickTime won't play MP4? How to play MP4 on VLC/QuickTime smoothly?" With this powerful MP4 to VLC/QuickTime Converter, it becomes easier to play all kinds of MP4 on VLC/QuickTime and you will never encounter the above problems. If you are Windows users, the Windows Guide can help you.

P.S Here you can choose more Video Converter for Mac softwares by viewing the Reviews.

Now, download and install the program from the website or click the free trial icon:

Image Image

Other Download:
- Pavtube old official address: http://www.pavtube.com/video-converter-mac/
- Amazon Store Download: http://www.amazon.com/Pavtube-Video-Converter-Mac-Download/dp/B00QIBK0TQ
- Cnet Download: http://download.cnet.com/Pavtube-Video-Converter/3000-2194_4-76179460.html



How to transcode Canon T6s/760D MP4 videos for playing on VLC or QuickTime?

Step 1: Then, launch the best MP4 Mac video converter and load your original MP4 files in with "Add video" or "Add from folder". Directly drag files in is available.

Image

Step 2: Choose the right output format for VLC. As we mentioned above, we would like to introduce you to select the "HD Video>>H.264 HD Video (*.mp4)" as your best choice. Surely you can choose other suitable ones as you like.

Image

Tips: For QuickTime, choose "Common Video>>MOV-QuickTime (*.mov)".

Step 3: The built-in editing function provided by Mac Video Converter is something worth trying. To trim the video, add artistic effects, adjust audio, add watermark, customize video parameters and so on. You can get the work done splendidly. Of course, if you don't think it's a necessary to do, you can skip it and move onto the next step directly.

Image

Tips: You can also go to the "Settings" to set the parameters for your videos.

Step 4: Click the "Convert" button on the main interface if you have done all the preparation work. This is the workflow that we need to convert T6s/760D MP4 to VLC/QuickTime best accepted format.

Conclusion: OK, everything is ready, and you can instantly play your Canon T6s/760D camcorder captured MP4 files on VLC/QuickTime. By the way, we have promoted money saving bundles & deals activity. It really saves a lot! Why not take a look and have a try about high quality products with attractive price?

Good News! Pavtube Bundles Dealsare coming! If you want to import/preserve/mix multi-track MXF in MKV/MP4/MOV formats, get multi-track Apple Prores MOV for further editing in Final Cut Pro (X), the following bundled software is your best choice:?
--------Video Converter($35) + MXF MultiMixer($45) = $54.9, Save $25.1 (buy link)
--------Video Converter for Mac($35) + iMixMXF($45) = $54.9, Save $25.1 (buy link)
Go ahead and click the link to get your coupon. Save up to $44.1!Never miss!!!

Further Reading:
Compress Sony FDR AX-100 4K XAVC S Files with Wondershare Alternative
Edit Sony Z100 4K XAVC in Sony Vegas 13
Import Ikegami GFCAM HDS-V10/HDN-X10 MXF to Aperture 3
Convert AJ-PX800 P2 MXF to MOV with no Quality Loss
Two Ways to Convert MKV to iTunes for Adding Videos
How to Get AVCHD MTS Workflow with DaVinci Resolve (Lite)?
Encode Tivo to MPEG-2 for Premiere Pro CC on Yosemite
MP4 video can be used perfectly in Premiere Pro CC
Help you import MKV to VLC Media Play
Share XAVC on YouTube/Vimeo/Facebook on Mac
Decode H.265 to Prores 422 for FCP X Editing

Source: http://pc-mac-compatibility-issues.blogspot.com/2015/03/play-t6s-mp4-on-vlc-quicktime.html


   OfflinePersonal Gallery of ujinwang3View user's profileSend private message
ujinwang3




Joined: 11 Nov 2014
Posts: 251

blank.gif
PostPosted: Thu Aug 13, 2015 5:51 pm  Post subject:  (No subject) Reply with quoteBottom of PageBack to top

MXF to EDIUS Pro 7 workflow--Perfect Edit Panasonic DVCPro HD

Summary: This article mainly talks about how to import Panasonic DVCPro HD MXF to EDIUS Pro 7 for seamlessly editing. If you are confused about MXF to EDIUS Pro 7 workflow, you’ve come to the right place!

Image

Hot search: MKV to EDIUS Pro 8 | GoPro MP4 File with EDIUS Pro 7 | AVI to EDIUS 7/7.01 | MP4 Video to EDIUS 6/7/8

"I've been struggling to import DVCPro HD in an MXF wrapper to EDIUS 7.21.822. No matter the settings, I get an error of ‘Could not use the selected format. Please confirm setting’. It doesn’t matter how I set them. Any ideas?"

EDIUS Pro 7 is the fastest and most versatile real-time editing software- 4K, 3D, HD, SD and almost any format from 24×24 to 4Kx2K, all on the same timeline, even in nested sequences, all in real-time. EDIUS Pro 7 gives you the ability to handle more resolutions, unlimited tracks and real-time editing for the ability to edit anything, anywhere. EDIUS Pro 7 is the perfect finishing tool for studio, news, corporate, documentary and 4K theatrical productions.

In order to import Panasonic DVCPro HD MXF to EDIUS Pro 7 smoothly, you’ll need to convert DVCPro HD MXF to a format that is suited for editing in EDIUS 7, like WMV, MOV, DNxHD and more. After multiple testing, I found Pavtube Video Converter is the best option for me. It is able to convert DVCPro HD MXF to EDIUS friendly format WMV easily with the best video quality. Besides DVCPro HD MXF, this video convert program can also help to convert between any popular video and audio formats as you need. Plus, with the built-in video editing feature of the program, you can trim, crop, add watermark and more to your video files.

Image Image

Other Download:
- Pavtube old official address: http://www.pavtube.com/video_converter/
- Amazon Download: http://download.cnet.com/Pavtube-Video-Converter/3000-2194_4-75734821.html
- Cnet Download: http://download.cnet.com/Pavtube-Video-Converter/3000-2194_4-75734821.html



How to import Panasonic DVCPro HD MXF to EDIUS Pro 7?

Step 1: As soon as you download and install the program, launch it and when the main interface pops up in front of us, just click the "Add Video" or "Add from Folder" to let in.

Image

Step 2: Click the drop-down list in the format line to get the format box. Then choose "HD Video>>WMV HD (*.wmv)" as output format.

Image

Step 3: Click "Settings" button to customize the output video and audio settings by yourself. But if you are not good at it, you’d better use the default parameters, they will ensure you a good balance between file size and image quality basically. You can change the resolution, bit rate, frame rate as you need.

Step 4: After that, click "Convert" to start DVCPro HD MXF to WMV conversion.

Conclusion: After conversion, you can get the generated files by clicking "Open" button. Now, you’ll get no troubles in importing Panasonic DVCPro HD MXF to EDIUS Pro 7.

Further Reading:

Convert JVC GY-HM200 MTS to ProRes for FCP X
Make Sony HX400V MTS Editable in Premiere Pro
Edit nanoFlash MXF in FCP
Top AVC-Intra MXF Converter
How to View GoPro Video on iPhone?
Get Phantom 3 4K MP4/MOV Files Work Well with After Effects
Import Canon Vixia MTS to iMovie for Burning to DVD

Hot News!!! Pavtube Summer Promotion has become something of a tradition, and it's back for 2015. Giveaway and Save up to 50% OFF for new Pavtube Software owners, this sale runs until Aug 7, 2015.

Source: http://file-editing-tips.over-blog.com/import-panasonic-dvcpro-hd-mxf-to-edius


   OfflinePersonal Gallery of ujinwang3View user's profileSend private message
ujinwang3




Joined: 11 Nov 2014
Posts: 251

blank.gif
PostPosted: Mon Aug 24, 2015 8:58 pm  Post subject:  (No subject) Reply with quoteBottom of PageBack to top

Canon MVI Video Converter- Changing Canon MVI to AVI format

Summary: This article will give you a brief guide to easily convert Canon MVI to AVI format for smooth playback and editing work.

Image

Hot search: Canon C100 MTS to Sony Movie Studio | Canon EOS 70D MOV to DaVinci Resolve | Canon XF for FCP X | Canon G7 X MP4 to Premiere Pro CC | Canon EOS 5DS MOV to Windows Movie Maker

Easy question, hoping for an easy answer.Using Canon digital for videos and my clips come up in mvi format which does not work for sending etc. Does anyone know how to convert from mvi to avi format?

MVI stands for Musical Video Interactive, a DVD based means of packing audio, video and interactive visual content (for example lyrics) onto one disk. Canon PowerShot digital cameras save recorded movie files with a name beginning with "MVI_."

When try to import those kinds of MVI files from Canon to some video editing software for editing or media player for playback, you will encounter incompatiblity issues. In that case, the simple way to successfully play or edit Canon MVI files is converting MVI to AVI format which is a more popular and supported video format by windows or mac.

To get better work with MVI file, you can get help with this professional Video Converter and Video Converter for Mac from Pavtube, which can convert MVI to AVI with perfect quality and fast conversion speed. What's more, it is the ideal conversion tool that offers several editing functions like cropping video dimension, trimming file length, adjust playing effects, etc. The converted AVI videos are well supported by mobile phones, different portable devices, media players and editing programs. Following is our workflow.

Image Image

Other Download:
- Pavtube old official address: http://www.pavtube.com/video_converter/
- Amazon Download: http://download.cnet.com/Pavtube-Video-Converter/3000-2194_4-75734821.html
- Cnet Download: http://download.cnet.com/Pavtube-Video-Converter/3000-2194_4-75734821.html


Part I: Transcode MVI to HD AVI for editing or playback

1. Run Pavtube Video Converter as the best MVI to AVI Converter. Click "Add Video" or "Add from folder" icon to load MVI material from Canon.

Image

2. Choose "AVI HD Video (*.avi)" as target format from "HD Video" option.

Image

3. (Optional) You can click "Settings" button and enter "Profile Settings" panel to adjust video and audio settings if necessary. Users are free to reset codec, bit rate, frame rate, sample rate, and audio channels.

4. Click the big button "Convert" to start converting MVI to AVI format.

When all conversions finished, click "Open" to locate the generated files, you may go ahead to create your own masterpiece.


Part 2: Import converted HD AVI for editing and playing.

Launch Windows Movie Maker, Adobe Premiere Pro, and other applications, import your hd .avi files into them and or transfer them to your portable devices or media players for watching.

Pavtube MVI Converter for Win/Mac other features:

1. It can rip and convert latest DVD and Blu-ray disc. And it is a great tool to backup discs: "Copy the entire disc" will 1:1 backup the whole movie with original structure, and "Directly Copy" can copy the main movie of the disc without menu and titbits.

2. You are allowed to edit the video, such as trim, crop, add watermark of text, image and video, attach subtitle, etc.

This integrated software will give you more than you have to do.



More related tips:


This weekend Pavtube offers up to 35% off Blu-ray/DVD Ripper & Video Converter, the best yet easy-to-use tools to convert your BD/DVD/video files into MP4, MOV, MKV, AVI, ProRes, HEVC...onto smartphone, tablet computer, media player, stream server, TV set, game console, VR headset, hard drive, etc. with multiple wanted audio/language/chapter markers!

Part of Discount Showtime:
Video Win/Mac------------30% off
MTS/M2TS Win/Mac-------20% off
MXF MultiMixer/iMixMXF----20% off
Discount can be found here: http://bit.ly/1hmOn34

Just like us on page and you can get it with all other free software giveaways, useful guides, and lifelong discounts.Enjoy your weekend with favorite Videos on any devices!

Image

Pavtube Upgrade Promotion: Up to 35% Video Converters : http://videostepconvertmap.blogspot.com/2015/08/upgrade-pavtube-add-prorestvh265-mkv.html

Source: http://1080p-video-tool.blogspot.com/2013/09/convert-mvi-to-avi-on-windows-and-mac.html


   OfflinePersonal Gallery of ujinwang3View user's profileSend private message
Display posts from previous:      
Post new topicReply to topic View previous topicEmail to a Friend.List users that have viewed this topicSave this Topic as filePrintable versionLog in to check your private messagesView next topic

View next topic
View previous topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum



RSS Feed


Board Security

196669 Attacks blocked
Powered by phpBB2 Plus, phpBB Styles and Kostenloses Forum based on phpBB © 2001/6 phpBB Group
FI Theme :: Mods and Credits :: All times are GMT - 8 Hours